92512101

HW LFR-120

---

HW hole cutter HW LFR-120, Will fit any commercial drill chuck, diameter 120 mm O, cutting depth 40 mm

Hole cutter, 120 mm O, suitable for wood and gypsum concrete plates, Recommended accessories: IBTronic XL Drillbox, Recommended accessories:, Hole cutter with spring for ejection of PCB, drilling depth up to 30 mm

97980201

FPD 185

---

Fermacell® plasterboard for retrospective installation in IBTronic XL H185

Recommended accessories: IBTronic XL Drillbox

97980301

LMK 76

---

luminaire assembly kit LMK 76, for subsequent installation in IBTronic XL Drillbox 976 801 01

Recommended accessories: IBTronic XL Drillbox, as replacement requirement

97980001

NS 35-90

35 x 110 x 15 мм

standard rail (35 mm) for subsequent installation in IBTronic-TT H120TT-S2

Recommended accessories:

97953201

K0 K15 BL

21 x 110 x 15 мм

2 blank cleats per box required

Blank cleat for mounting the mounting box K0 EK and the mounting box K15 EK for opposing formwork, 2 pieces are required for each box, Recommended accessories:

97973001

STH 230

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads, Recommended accessories:

97974001

STH 240

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads, Recommended accessories:

97979001

STH 290

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads, Recommended accessories:

97969001

STH 190

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads, Recommended accessories:

97967001

STH 170

---

----

Support spars for various wall thicknesses in opposing formwork, always used in conjunction with blank base or back mounted box, spar length = wall thickness minus 1 cm, 2 support spars per socket, 4 support spars for extreme loads, Recommended accessories:

97980101

FPD 120

---

Fermacell® plasterboard for retrospective installation in H120 P

Recommended accessories:

97921801

NAH IBTronic H 120

---

1 set = 4 pcs.

For fitting the IBTronic-P universal installation enclosure in site cast concrete applications. Four nailing tools per enclosure required, 1 set = 4 pcs.